X2 XDR959

X2 XDR959 are no longer made.

Please check out these replacement products:

Manuals:

Other Languages
X2™ XDR959 Overall System Specifications
  • Transmission Format: Line 6 proprietary digital audio transmission
  • Frequency Response: 10 Hz - 20 kHz
  • Audio Dynamic Range: Greater than 118 dB
  • Distortion: 0.03% THD
  • RF Carrier Frequency: 902 MHz to 928 MHz, FSK, dual frequency transmission
  • Compatible Channels: Five
  • RF Output Power: 15mw
  • Audio Output Level: Unity gain with transmitter input
  • Polarity: Positive voltage at input yeilds positive voltage at output
  • Transmission Range: 300 feet line-of-sight (may vary due to local conditions)
  • FCC Approval: Part 15 approved, no user-license required
  • Operating Temperature Range: -20° to +85° C (-4° to +185° F)
XDT4 Transmitter Specifications
  • A/D Conversion: 24-bit Delta Sigma, 128 times over sampling
  • Input Impedance: 1.2 M-ohm instrument input, 10K-ohm mic input
  • Connectors: 1/8" Unbalanced locking connector
  • Controls: Power On/Off, Channel Select
  • Five Segment LED Display: Power On, Channel, Battery Life, Audio Level Meter
  • Dimensions (WxHxD): 2.4 x 4 x .8" (6.09 x 10.16 x 2.03 cm)
  • Battery Life: 9V alkaline, switching power supply, two modes:
    Q-DiversityPLUS™ mode: ~5.5 hrs in (dual frequency)
    Q-Diversity™ mode: ~6.5 hrs in standard (single frequency)
  • Weight: .25 lbs. (with 9V battery installed)
  • Housing: Polycarbonate, impact tested to 300 lbs.
XDR4 Receiver Specifications
  • D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
  • Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
  • Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR Balanced 600 ohm
  • LED Display: Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
  • Controls: Power On/Off, Channel Up and Down
  • Dimensions (WxHxD): 16.2 x 1.75 x 7.5" (41.14 x 4.44 x 19.05 cm)
  • Power Requirements: 9V DC 500mA via included AC/DC adapter
  • Weight: 2.5 lbs (with rack hardware and antenna installed)
  • Housing: Polycarbonate, impact tested to 300 lbs.
Download Wireless Microphone White Paper