antonioctd

updating now B) will report back!

My guess, and it is just a guess, is that you are playing in a small stage and when the band is actually playing live there is a lot of things going in to every mic. When you are playing back the recording you are getting a better separation in each channel. Hope that makes any sense...

Please do! :)

Yah, that kind of stuff have been happening with the record functions of the M20d. If it was user error it has to be a lot of users errors by a lot of different people... Not likely....

Can't open the link... It just goes to the youtube main page (not to any specific video or channel) . Yah, maybe some computer genius can retrieve the data. I don't know... I only play guitar :rolleyes: :D Anyway, if you, by any chance, find a way to retrieve the data, all of us on this forum would thank you a lot for that information! ;)

No way to recover the data unfortunately... It has been a very common problem with the M20d! Take a look at this topic: http://line6.com/support/topic/625-line-inputs-recordings-failed-since-110-update/

I'm also waiting for the android app. If it does not come out will by a multi-pair cable with stage box and set the mixer the traditional way. I wont buy an apple product just for this! Period!

It is expected. It works that way to prevent any accidents...

Just delete the channels from the stage. You can quickly save that as a new setup just for recording and keep the old one for other proposes...

Well, all I can say is that since I've been working with the M20d I never had to even think about feedback again... :rolleyes: So yah Tochiro, there must be something very wrong there!

Hi, Just came to report the I've been following the tips and advice given here on the forum: Format the SD card, create and save new setup/scene stop/start recording carefully etc... And every thing as been working. I've done quite a few successful recordings since then. I don't have the time to do proper tests and try one thing at a time. I just followed all the advice at once. So I don't know the real cause or what I as doing wrong before. Thanks for all the help.

can this have any thing to do with setups created before or after the firmware update? I also had 2 successful recordings. I know for sure these were done on new setups done recently, so they were not created for that session but were created on 1.10 firmware. I can't really remember with setups were done before the update... So I don't know if my failed recordings were done on setups reloaded from a back up from the previous firmware.

Anything you can tell yet? Little inside, trick or tip? I'm really sure you guys are trying your best to solve this for good ASAP. But I have work always coming up and any little tip would help I know that I must be doing things differently because computers are not random and sometimes I can record without problems and others I can't. I've already received a nice tip, from one of you at line6, regarding my video. I now know that "quick capture" does not record the aux-in and if I try to use it before recording to the SD it will not record the aux-in on the SD card as well. That's a nice bit of info to have! Thanks Any more info of this kind? :rolleyes: B)

+1 That would be useful information

I think the only point to import would be to edit the recording or to add overdubs. Other wise it's better to just mix on the mixer.